NABL Accredited · CC-2480 · Est. 2004 · Gujarat's Trusted Calibration Lab
NABL-accredited calibration for biochemistry, haematology, blood gas, and coagulation analysers. ISO 15189 traceable, accepted by NABH, CAP, and all lab accreditation auditors.
Multi-param
Range
±2%
Accuracy
ISO 15189
Standard
ISO 15189
Medical Lab Standard
NABL Accredited
CC-2480
— WHAT IS BLOOD ANALYSER CALIBRATION —
Imagine a haematology analyser reporting a patient's haemoglobin 1.5 g/dL too low — a misdiagnosis of anaemia, an unnecessary transfusion, or a missed real condition. In clinical chemistry, even a small uncalibrated drift changes treatment decisions.
Blood chemistry analyser calibration establishes a traceable relationship between the analyser's response and certified reference material concentrations at low, normal, and high levels. Deviations are documented, linearity and carry-over assessed, and a NABL certificate issued confirming ISO 15189 compliance — accepted by NABH, CAP, and lab accreditation auditors.
Check
Analyte response measured at low, normal, and high concentration levels using certified reference materials.
Correct
Calibration coefficients adjusted; linearity and carry-over verified per analyser protocol.
Certify
NABL CC-2480 certificate issued with full accuracy data and uncertainty statement.
— INSTRUMENTS COVERED —
Biochemistry, haematology, blood gas, and coagulation analysers across all makes and models.
CBC analysers verified for WBC, RBC, Hgb, HCT, MCV, and platelet count accuracy using reference calibrators.
Automated biochemistry analysers calibrated for photometric accuracy, linearity, and carry-over.
ABG analysers verified for pH, pCO2, pO2, HCO3⁻, and electrolyte accuracy using certified calibrant solutions.
PT, APTT, INR, and fibrinogen analysers verified for analytical accuracy using certified plasma controls.
— OUR PROCESS —
Analyser make, model, measurement parameters, last calibration date, and current QC data reviewed before calibration commences.
Manufacturer-supplied calibrators and QC materials verified for lot number, expiry, and storage conditions before use.
Instrument calibrated at low, normal, and high concentration levels for each analyte using certified reference materials traceable to SI units.
Analytical measurement range linearity verified. Carry-over percentage tested between high and low concentration samples.
Post-calibration accuracy verified at all points per ISO 15189. Expanded uncertainty calculated per ISO/IEC 17025.
NABL CC-2480 certificate with accuracy data for each analyte, uncertainty (k=2), and ISO 15189 reference issued within 24 hours.
— STANDARDS & COMPLIANCE —
Every blood analyser calibration is performed under ISO 15189, with full traceability to certified reference materials. Our certificates satisfy all medical laboratory accreditation requirements.
ISO/IEC 17025
NABL Accreditation Standard
ISO 15189
Medical Laboratory Standard
IEC 61010
Lab Equipment Safety
ISO 13485
Medical Device QMS
NABH
Hospital Accreditation
CAP
Lab Accreditation
NPL / NIST
Traceable Reference
ISO 9001:2015
Quality Management
Prism holds NABL CC-2480 under ISO/IEC 17025:2017, recognized under the ILAC MRA agreement. Our biomedical calibration certificates are valid for WHO GMP, FDA, NABH, and all audit purposes.
— NON-NABL CALIBRATION —
For routine maintenance, bulk calibration, or facilities not needing NABL certification — Prism offers cost-effective non-NABL calibration with the same trained engineers and traceable references.
All non-NABL jobs use the same NPL-traceable references — only the certificate type differs.
Non-NABL jobs completed faster — ideal for urgent maintenance or large bulk batches.
Priced lower than NABL — right choice for internal checks and non-audit use cases.
Available at our Ahmedabad lab and as onsite service across Gujarat — same team, same quality.
— AREAS WE SERVICE —
NABL-certified engineers travel to your facility across Gujarat — hospital, pharma, or laboratory onsite service.
Why Choose Prism
Since 2004, every NABL biomedical certificate issued by Prism has been accepted by WHO GMP, FDA, NABH, and ISO auditors — no rejections, no rework.
— FAQ —
Get In Touch
Tell us what you need calibrated and whether you need onsite or in-lab service. We respond within 2 business hours.
— FROM OUR BLOG —
NABL Accreditation Disclaimer
Calibration services are provided under NABL Certificate CC-2480 in strict accordance with our officially approved scope of accreditation (ISO/IEC 17025:2017). Parameters or onsite conditions falling outside our active NABL scope are processed with standard metrological traceability to NPL/BIPM national standards.
