NABL Accredited · CC-2480 · Est. 2004
Mass, Volume, Flow &
Velocity Calibration
Gujarat's most trusted NABL-accredited calibration for weighing balances, standard weights, flow meters, pipettes, anemometers, and tachometers. NABL certificate CC-2480. Onsite across Gujarat.
Weighing Balance Calibration
Spring Balance Calibration
Volumetric Instrument Calibration
NABL Accredited
CC-2480
OIML R 111
Mass Standard
— WHAT IS MASS, VOLUME & FLOW CALIBRATION —
What Is Mass, Volume & Flow Calibration
& Why Does It Matter?
Think of it like a shopkeeper's weighing scale. If the scale shows 1 kg but the real weight is 1.05 kg, the shopkeeper is cheating customers without knowing it. The same happens in labs and factories — if a pipette dispenses 95 µL instead of 100 µL, or a weighing balance reads 50g low, every formula, batch, or product is wrong.
Mass, volume, and flow calibration means checking your balance, weight, pipette, or flow meter against a certified reference, fixing any error, and issuing an NABL certificate as proof — required by FDA, ISO 9001, Legal Metrology, and GMP auditors.
Product Safety
Wrong dosing due to an un-calibrated pipette or balance can cause under/over-dose in pharma or food products.
Quality Control
Precise mass and volume measurements ensure every batch meets the specification and passes QC testing.
Legal Compliance
Legal Metrology Act and FDA/GMP require calibrated weighing and volumetric instruments with valid certificates.
Cost Saving
Catching balance drift or pipette error early prevents batch failures, raw material waste, and audit penalties.
1mg
Lowest Mass
2000kg
Highest Capacity
OIML
R 111 Standard
— WHAT YOU GET —
Every Mass, Volume & Flow Calibration Includes
Comprehensive end-to-end calibration with full OIML/NPL traceability and NABL certification.
Onsite at Your Plant
Engineer arrives with portable flow rigs, reference weights, and balances. No instrument removal needed.
No DowntimeMulti-Point Calibration
Each instrument calibrated at 5+ points across full range per ISO/IEC 17025 — tare, mid, and full capacity.
Full RangeAs-Found & As-Left Data
Pre and post calibration readings at all test points. Complete error and uncertainty analysis documented.
ISO/IEC 17025NABL Certificate CC-2480
NABL certificate with OIML/NPL traceability, expanded uncertainty, as-found/as-left data.
Digital DeliverySame-Day Urgent Service
Legal Metrology or GMP audit tomorrow? Same-day calibration and certificate across Gujarat.
Urgent AvailableAll Flow Meter Types
Electromagnetic, Coriolis, ultrasonic, turbine, vortex, rotameter — liquid and gas flow calibration.
All TechnologiesMicropipette Calibration
Gravimetric micropipette calibration per ISO 8655 — all channels, 3 volume points, NABL certified.
ISO 8655Annual AMC Available
Scheduled mass, volume, and flow calibration program with reminders and priority service.
Planned MaintenanceOnsite Across Gujarat · NABL CC-2480
Ready to Calibrate Your Flow & Mass Instruments?
Onsite service · Same-day urgent · NABL certificate within 24 hours
— INSTRUMENTS COVERED —
Mass, Volume & Flow Instruments We Calibrate
60+ instrument types across 8 categories — all makes, all ranges, NABL accredited.
Weighing Balance
6 instrument types
- Analytical Balance (0.1mg/0.01mg)
- Precision Balance (1mg–1g)
- Semi-Micro Balance
- Macro Balance
- Industrial Electronic Balance
- Moisture Analyzer Balance
Weight Box
6 instrument types
- Standard Weight Box (Class E1/E2)
- Class F1/F2 Weight Box Set
- Class M1/M2/M3 Weight Box
- OIML Calibration Weight Box
- Analytical Weight Box (1mg–200g)
- Milligram Weight Box
Weight
6 instrument types
- Cast Iron Platform Weights
- Stainless Steel Weights
- Class E1/E2 Individual Weights
- Class F/M Individual Weights
- Cylinder Weights
- Knob/Hook Weights
Spring Balance
6 instrument types
- Analog Spring Balance
- Digital Spring Balance
- Hanging Spring Balance
- Pocket Spring Balance
- Heavy-Duty Spring Balance
- Newton Spring Balance
Pipette
6 instrument types
- Graduated Pipette
- Volumetric Pipette
- Pasteur Pipette
- Transfer Pipette
- Serological Pipette
- Bulb Pipette
Micro Pipette
6 instrument types
- Single Channel Micropipette
- Multichannel Micropipette
- Repeat Dispenser Pipette
- Fixed Volume Micropipette
- Auto-Dispensing Micropipette
- Electronic Pipette
Measuring Cylinder
6 instrument types
- Glass Measuring Cylinder
- Plastic Measuring Cylinder
- Graduated Measuring Cylinder
- Tall Form Measuring Cylinder
- Heavy-Duty Measuring Cylinder
- Narrow-Form Measuring Cylinder
Measuring Flask
6 instrument types
- Volumetric Flask
- Conical (Erlenmeyer) Flask
- Flat Bottom Flask
- Round Bottom Flask
- Iodine Flask
- Kjeldahl Flask
Hydrometer
6 instrument types
- Alcohol Hydrometer
- Acid Hydrometer
- Battery / Electrolyte Hydrometer
- Petroleum Hydrometer
- Brix Hydrometer
- Salinometer Hydrometer
Lactometer
6 instrument types
- Milk Lactometer (Glass)
- Digital Lactometer
- Quevenne Lactometer
- Zeal Lactometer
- Gerber Lactometer
- Quick-Test Lactometer
Butyrometer
6 instrument types
- Gerber Milk Butyrometer
- Cream Butyrometer
- Baby Food Butyrometer
- Skim Milk Butyrometer
- Ice Cream Butyrometer
- Cheese Butyrometer
Burettes
6 instrument types
- Glass Burette (Class A/B)
- Automatic Burette
- Digital Burette
- Micro Burette
- Piston Burette
- Semi-Automatic Burette
Don't see your instrument? We calibrate 200+ instrument types across all major brands.
— OUR PROCESS —
Mass, Volume & Flow Calibration Process
Every calibration follows our documented ISO/IEC 17025 procedure — traceable, repeatable, auditable.
Intake & Documentation
Instrument received, tagged with job number. Type, capacity, range, make, model noted. Pre-calibration condition documented.
As-Found Measurement
Instrument measured at defined points against NPL/OIML-traceable references. As-found readings at zero, mid, and full scale documented.
Reference Comparison
Readings compared to traceable reference weights, certified flow rigs, or gravimetric standards. Error calculated at each calibration point.
Adjustment / Correction
Span, zero, and linearity adjustments made where applicable. Smart flow transmitters adjusted. Correction tables issued if required.
As-Left Verification
Post-adjustment readings verified at all points. Expanded measurement uncertainty calculated per ISO/IEC 17025. Pass/fail recorded.
NABL Certificate Issued
NABL CC-2480 certificate with as-found/as-left data, expanded uncertainty, OIML/NPL traceability, and digital delivery within 24 hours.
Industry Applications
Industries That Require Mass & Flow Calibration
Accurate mass and flow measurement is critical for product quality, safety, and regulatory compliance.
Pharmaceuticals & Biotech
Weighing balances, micropipettes, and flow meters calibrated to FDA 21 CFR and WHO GMP requirements.
Know MoreOil, Gas & Custody Transfer
Coriolis, ultrasonic, and PD meters for custody transfer applications. Legal Metrology compliant.
Know MoreChemical & Specialty Chem.
Bulk flow measurement, reactor dosing, and mass transfer instrument calibration.
Know MoreFertilizer & Agrochemical
Mass flow controllers, weighing systems, and level instruments in ammonia and urea plants.
Know MoreFood, Beverage & Dairy
Hygienic flow meters, weighing balances, and dosing systems calibrated to FSSAI and FSSC standards.
Know MoreWater & Wastewater
Electromagnetic and ultrasonic flow meters for water distribution, ETP, and STP plants.
Know MorePower & Utilities
Steam flow meters, condensate meters, and coal/fuel weighing systems for power plant mass balance.
Know MoreCement, Steel & Mining
Conveyor weighers, belt scales, and silo level instruments for bulk material handling.
Know MoreWhy Choose Prism
Two Decades of Precision.
Zero Audit Failures.
Since 2004, every NABL mass and flow calibration certificate issued by Prism has been accepted by ISO, FDA, GPCB, and Legal Metrology auditors — no rejections, no rework.
— STANDARDS & COMPLIANCE —
Calibration Backed by International Standards
Every mass, volume, and flow calibration at Prism follows documented OIML, ISO, and NPL procedures — accepted by FDA, ISO, GPCB, and Legal Metrology auditors.
OIML R 111
Standard Weights Classification
ISO 4185
Liquid Flow Measurement
ISO 8655
Piston Pipette Standard
NIST / NPL
Traceable Reference Standards
ISO/IEC 17025
NABL Accreditation Standard
Legal Metrology
Commercial Weighing Equipment
ISO 9001:2015
Quality Management System
ISO 6817
Electromagnetic Flow Measurement
NABL Accreditation — CC-2480
Prism holds NABL accreditation CC-2480 under ISO/IEC 17025:2017, recognized under the ILAC MRA agreement. Our mass and flow calibration certificates carry the same legal weight as any NABL lab worldwide — valid for ISO, FDA, GPCB, and Legal Metrology audits.
60+
Instrument Types
1mg–2T
Mass Range Covered
— NON-NABL CALIBRATION —
Non-NABL Mass & Flow Calibration Also Available
For routine maintenance or bulk calibration not requiring NABL certification, Prism provides cost-effective non-NABL mass and flow calibration with the same trained engineers and traceable reference standards.
Traceable Reference Standards
All calibrations use OIML/NPL/BIPM-traceable reference standards regardless of NABL or non-NABL certificate type.
Faster Turnaround
Non-NABL mass/flow jobs completed faster — ideal for urgent maintenance or bulk batch calibration.
Cost-Effective Pricing
Non-NABL calibration priced lower — right choice for internal checks and non-audit use cases.
Onsite or In-Lab
Available at our Ahmedabad lab and as onsite service across Gujarat — with or without NABL.
Onsite Coverage
Serving All
of Gujarat
NABL-certified engineers travel to your facility with portable calibration equipment — no instrument removal, zero production downtime.
Explore Related Services
All under one NABL-accredited roof — CC-2480
Pressure Calibration
Gauges, transmitters, dead weight testers.
Temperature Calibration
Thermocouples, RTDs, data loggers.
Electrical Calibration
Multimeters, clamp meters, power analyzers.
HART Calibration
Smart HART transmitters, sensor & output trim.
UTM & Torque
Force gauges, load cells, torque wrenches.
Biomedical Calibration
Autoclaves, incubators, pH meters.
Hardness Calibration
Rockwell, Brinell, Vickers, Shore.
All Services
View complete calibration & testing catalog.
— Our Clients —
Trusted By Industry Leaders
— CLIENT VOICES —
What Our Mass & Flow Calibration Clients Say
Prism calibrates all our weighing balances, standard weights, and flow meters under NABL. The certificates have been accepted in every statutory audit without question. Excellent service.
Flow meter and pipette calibration by Prism — NABL certified, traceable to OIML R 111. Our FDA and WHO GMP auditors accept every certificate. Very professional team.
Custody transfer flow meters and weighbridges calibrated annually by Prism. They handle everything from Coriolis to electromagnetic flow meters onsite. Highly recommended.
Prism calibrates all our weighing balances, standard weights, and flow meters under NABL. The certificates have been accepted in every statutory audit without question. Excellent service.
Flow meter and pipette calibration by Prism — NABL certified, traceable to OIML R 111. Our FDA and WHO GMP auditors accept every certificate. Very professional team.
Custody transfer flow meters and weighbridges calibrated annually by Prism. They handle everything from Coriolis to electromagnetic flow meters onsite. Highly recommended.
Prism calibrates all our weighing balances, standard weights, and flow meters under NABL. The certificates have been accepted in every statutory audit without question. Excellent service.
Flow meter and pipette calibration by Prism — NABL certified, traceable to OIML R 111. Our FDA and WHO GMP auditors accept every certificate. Very professional team.
Custody transfer flow meters and weighbridges calibrated annually by Prism. They handle everything from Coriolis to electromagnetic flow meters onsite. Highly recommended.
Get In Touch
Request a Free Quote
Describe your requirement — flow meters, weighing balances, standard weights, or onsite calibration. Our team responds within 2 business hours.
— FAQ —
Mass, Volume & Flow Calibration — FAQ
Everything about mass, flow, and volume instrument calibration, NABL compliance, and our services.
Need Mass & Flow Calibration in Gujarat?
Call or WhatsApp — we reply within the hour. Onsite or in-lab, NABL certificate guaranteed.
Prism Calibration Centre · F 101, Rudraksh Complex 2, Phase 3, GIDC Vatva, Ahmedabad, Gujarat 382445
— FROM OUR BLOG —
Related Articles & Guides
Flow Meter Calibration Labs in Ahmedabad — NABL Certified | Prism
Accurate flow meter calibration is critical for chemical, water treatment, and pharma industries in Ahmedabad. Prism Calibration Centre offers NABL-certified calibration for all flow meter types.
Read More
Load Cell Calibration Guide — Types, Methods & NABL | Prism
Load cells are the sensing hearts of industrial weighing systems. NABL-certified load cell calibration per OIML R 60 ensures accurate weighing and compliance for trade and quality control.
Read More
Flow Meter Calibration in Ahmedabad — NABL Certified Lab | Prism
Prism Calibration Centre is Ahmedabad's NABL-certified flow meter calibration lab, delivering precise, traceable calibration for all flow meter types with 24-hour turnaround.
Read MoreNABL Accreditation Disclaimer
Calibration services are provided under NABL Certificate CC-2480 in strict accordance with our officially approved scope of accreditation (ISO/IEC 17025:2017). Parameters or onsite conditions falling outside our active NABL scope are processed with standard metrological traceability to NPL/BIPM national standards.